expand for answer

Fragment

A piece of a packet. When a router is forwarding an IP packet to a network with a Maximum Transmission Unit smaller than the packet size, it is forced to break up that packet into multiple fragments. These fragments will be reassembled by the IP layer at the destination host. When a network receives a packet larger than its maximum allowable packet size, it breaks it up into two or more fragments. These fragments are each assigned a size (corresponding to the length of the fragment) and an offset (corresponding to the starting location of the fragment).

Go Home

Similar items:

Maturity Level Details:Maturity levels consist of a predefined set of process areas. The maturity levels are measured by the achievement of the specific and generic goals that apply to each predefined set of process areas. The following sections describe the characteristics of each maturity level in detail.Maturity Level 1 - Initial At maturity level 1, processes are usually ad hoc and chaotic. The organization usually does not provide a stable environment. Success in these organizations depends on the competence and heroics of the people in the organization and not on the use of proven processes.Maturity level 1 organizations often produce products and services that work; however, they frequently exceed the budget and schedule of their projects.Maturity level 1 organizations are characterized by a tendency to over commit, abandon processes in the time of crisis, and not be able to repeat their past successes.Maturity Level 2 - Managed At maturity level 2, an organization has achieved all the specific and generic goals of the maturity level 2 process areas. In other words, the projects of the organization have ensured that requirements are managed and that processes are planned, performed, measured, and controlled.The process discipline reflected by maturity level 2 helps to ensure that existing practices are retained during times of stress. When these practices are in place, projects are performed and managed according to their documented plans.At maturity level 2, requirements, processes, work products, and services are managed. The status of the work products and the delivery of services are visible to management at defined points.Commitments are established among relevant stakeholders and are revised as needed. Work products are reviewed with stakeholders and are controlled.The work products and services satisfy their specified requirements, standards, and objectives.Maturity Level 3 - Defined At maturity level 3, an organization has achieved all the specific and generic goals of the process areas assigned to maturity levels 2 and 3.At maturity level 3, processes are well characterized and understood, and are described in standards, procedures, tools, and methods.A critical distinction between maturity level 2 and maturity level 3 is the scope of standards, process descriptions, and procedures. At maturity level 2, the standards, process descriptions, and procedures may be quite different in each specific instance of the process (for example, on a particular project). At maturity level 3, the standards, process descriptions, and procedures for a project are tailored from the organization's set of standard processes to suit a particular project or organizational unit. The organization's set of standard processes includes the processes addressed at maturity level 2 and maturity level 3. As a result, the processes that are performed across the organization are consistent except for the differences allowed by the tailoring guidelines.Another critical distinction is that at maturity level 3, processes are typically described in more detail and more rigorously than at maturity level 2. At maturity level 3, processes are managed more proactively using an understanding of the interrelationships of the process activities and detailed measures of the process, its work products, and its services.Maturity Level 4 - Quantitatively Managed At maturity level 4, an organization has achieved all the specific goals of the process areas assigned to maturity levels 2, 3, and 4 and the generic goals assigned to maturity levels 2 and 3.At maturity level 4 Subprocesses are selected that significantly contribute to overall process performance. These selected subprocesses are controlled using statistical and other quantitative techniques.Quantitative objectives for quality and process performance are established and used as criteria in managing processes. Quantitative objectives are based on the needs of the customer, end users, organization, and process implementers. Quality and process performance are understood in statistical terms and are managed throughout the life of the processes.For these processes, detailed measures of process performance are collected and statistically analyzed. Special causes of process variation are identified and, where appropriate, the sources of special causes are corrected to prevent future occurrences.Quality and process performance measures are incorporated into the organization.s measurement repository to support fact-based decision making in the future.A critical distinction between maturity level 3 and maturity level 4 is the predictability of process performance. At maturity level 4, the performance of processes is controlled using statistical and other quantitative techniques, and is quantitatively predictable. At maturity level 3, processes are only qualitatively predictable.Maturity Level 5 - Optimizing At maturity level 5, an organization has achieved all the specific goals of the process areas assigned to maturity levels 2, 3, 4, and 5 and the generic goals assigned to maturity levels 2 and 3.Processes are continually improved based on a quantitative understanding of the common causes of variation inherent in processes.Maturity level 5 focuses on continually improving process performance through both incremental and innovative technological improvements.Quantitative process-improvement objectives for the organization are established, continually revised to reflect changing business objectives, and used as criteria in managing process improvement.The effects of deployed process improvements are measured and evaluated against the quantitative process-improvement objectives. Both the defined processes and the organization's set of standard processes are targets of measurable improvement activities.Optimizing processes that are agile and innovative depends on the participation of an empowered workforce aligned with the business values and objectives of the organization. The organization's ability to rapidly respond to changes and opportunities is enhanced by finding ways to accelerate and share learning. Improvement of the processes is inherently part of everybody's role, resulting in a cycle of continual improvement.A critical distinction between maturity level 4 and maturity level 5 is the type of process variation addressed. At maturity level 4, processes are concerned with addressing special causes of process variation and providing statistical predictability of the results. Though processes may produce predictable results, the results may be insufficient to achieve the established objectives. At maturity level 5, processes are concerned with addressing common causes of process variation and changing the process (that is, shifting the mean of the process performance) to improve process performance (while maintaining statistical predictability) to achieve the established quantitative process-improvement objectives.
[view]

Authentication protocol that allows PPP peers to authenticate one another. The remote router attempting to connect to the local router is required to send an authentication request. Unlike CHAP, PAP passes the password and hostname or username in the clear (unencrypted). PAP does not itself prevent unauthorized access, but merely identifies the remote end. The router or access server then determines if that user is allowed access. PAP is supported only on PPP lines. Compare with CHAP.
[view]

A networking device that connects networks that are using different network protocols. A product that enables two dissimilar networks to communicate or interface with each other. In the IP community, an older term referring to a routing device. Today, the term “router” is used to describe nodes that perform this function, and “gateway” refers to a specialpurpose device that performs an application layer conversion of information from one protocol stack to another. Compare with router. Interface providing a compatibility between networks by converting transmission speeds, protocols, codes, or security measures.
[view]

A mechanical, electrical, or electronic device that opens or closes circuits, completes or breaks an electrical path, or selects paths or circuits. A switch looks at incoming data to determine the destination address. Based on that address, a transmission path is set up through the switching matrix between the incoming and outgoing physical communications ports and links. A network device that is an intelligent hub because it knows the addresses of the systems connected on each outbound port. Instead of repeating traffic on every outbound port, a switch repeats only traffic out of the port on which the destination is known to exist. Switches offer greater efficiency for traffic delivery, create separate broadcast and collision domains, and improve the overall throughput of data.
[view]

Layer 2 Forwarding Protocol. Protocol that supports the creation of secure virtual private dialup networks over the Internet.
[view]

There are no comments yet.

Authentication required

You must log in to post a comment.